Active filters
Pool Equipment
Subcategories
-
Automatic dosing system...
The measuring and control system DULCOMARIN® 3
-
Automatic Metering and...
Automatic Metering and Dosing Sysytem Splash Control
Convenient and simple: crystal-clear water in private and commercial swimming pools.
-
Automatic pool dosing...
Convenient and simple: crystal-clear water in private and commercial swimming pools. This is Dulcodos Pool Comfort system
-
Chlorine Dioxide System...
22 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h
-
CHLORINSITU® II 120g...
CHLORINSITU® II 120g Electrolysis System | Prominent
Open cell technology
-
CHLORINSITU® II 240g...
CHLORINSITU® II 240g Electrolysis System | Prominent
Open cell technology
-
CHLORINSITU® II 60g...
CHLORINSITU® II 60g Electrolysis System | Prominent
Open cell technology
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series covers a capacity range of (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series covers a capacity range of (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series with capacity range of 5 LPH at pressure 7bar.
-
DULCOFLOW DFMa08 | Prominent
Flow Meter DULCOFLOW
For the measurement of pulsating volumetric flows within the range of 0.03 ml/stroke to 10 ml/stroke The flow meter DULCOFLOW reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance as all wetted parts are made of PVDF and PTFE.
-
DULCOTEST® ORP Sensor |...
DULCOTEST® ORP Sensors
-
DULCOTEST® pH Sensor | PHES...
DULCOTEST® pH Sensors
Graduated pH measuring ranges 0 – 14
-
Free Chlorine Sensor CGE |...
The Prominent CLE 3.1-mA is a sensor with a passive 4-20 mA two-wire interface, ie power is supplied externally, for example via the controller. Measuring range: CLE 3.1-mA-10 ppm: 0.1...10 mg/l (nominal slope: 1.2 mA/ppm)
-
Free Chlorine Sensor CLE |...
The Prominent CLE 3.1-mA is a sensor with a passive 4-20 mA two-wire interface, ie power is supplied externally, for example via the controller. Measuring range: CLE 3.1-mA-10 ppm: 0.1...10 mg/l (nominal slope: 1.2 mA/ppm)
-
Heat exchanger GK190-5117-3...
Heat exchanger GK190-5117-3 | BOWMAN | Titanium
-
Lip Seal Injection Valve PCB
Lip Seal Injection Valve PCB
10/4 - R 1/2 - 1/4 for PE/PTFE pipe
-
Membrane Cap for CGE 3,...
ProMinent membrane cap for CGE 3, CGE 2, CTE 1 sensors
-
Membrane Cap for CLE 3.1...
ProMinent membrane cap 2 for CLE 3.1
-
Motor-Driven Metering Pump...
Sigma 2 10bar, up to 135 liters/h, DN20
-
PE Suction and Discharge...
PE Suction and Discharge Line 10m
-
PE Suction and Discharge...
PE Suction and Discharge Line 50m | 12/9mm
-
PE Suction and Discharge...
PE Suction and Discharge Line 50m | 8/5mm
-
PE Suction and Discharge...
PE Suction and Discharge Line | 12/9mm
Indicated price is per running meter.
-
PE Suction and Discharge...
PE Suction and Discharge Line | 8/5mm
Indicated price is per running meter.
-
Peristaltic metering pump...
Peristaltic pump DULCOFLEX DFYa 410 liters/h, 8bar
-
Peristaltic pump DULCO flex...
Peristaltic pump DULCO flex Control - DFXa
Feed rate of 10 ml/h to 30 l/h at up to 5 bar back pressure DULCO flex Control – DFXa meters gaseous, viscous, abrasive or shear-sensitive media and sets new standards in metering. Linear and reproducible metering (± 2%) is guaranteed with this peristaltic pump under all process conditions. With it's painted design, the tube is easily replaced preventing losses in valuable production down time.
-
Peristaltic pump DULCO flex...
Peristaltic pump DULCO flex Control - DFXa
Feed rate of 10 ml/h to 30 l/h at up to 7 bar back pressure DULCO flex Control – DFXa meters gaseous, viscous, abrasive or shear-sensitive media and sets new standards in metering. Linear and reproducible metering (± 2%) is guaranteed with this peristaltic pump under all process conditions. With it's painted design, the tube is easily replaced preventing losses in valuable production down time.
-
Peristaltic pump DULCO flex...
Peristaltic pump DULCO flex DF2a
Capacity range 0.4 – 2.4 l/h at max. 1.5 bar back pressure The peristaltic pump DULCO®flex DF2a meters chemicals functionally, cost-effectively and quietly – ideal for use in swimming pools, hot tubs, and in spa and wellness facilities.
-
Prominent Chemical Tank 60ltr
Prominent Chemical Tank 60ltr
Anyone who works with chemicals needs to store them safely. ProMinent dosing tanks are tough. Prominent metering tanks are ideal for the safe storage and metering of chemicals and are designed to work with Prominent’s Gamma /x, Beta and Alpha range of metering pumps.
Your benefits
Environmentally-friendly storage of liquid chemicals
Robust and durable: made of sturdy UV-stabilised PE (polyethylene)
Scale for litres and US gallons
Simple to install: sintered threaded sockets for fixing ProMinent metering pumps on to storage tanks
Safe storage: If the contents are not needed, a screw-on lid keeps them tightly secure (push-on lid for 35-litre storage tank)
Flat sides to secure the storage tank
We use and provide only time-tested and high-quality swimming pool equipment from leading pool equipment manufacturers in Western Europe (BEHNCKE Hugo Lahm ASTRALPOOL, Pahlen, Speck Pumpen, Lambert Pools, LPW, Tintometer and other)