Active filters
Pool Equipment
Subcategories
-
Automatic dosing system...
The measuring and control system DULCOMARIN® 3
-
Automatic Metering and...
Automatic Metering and Dosing Sysytem Splash Control
Convenient and simple: crystal-clear water in private and commercial swimming pools.
-
Automatic pool dosing...
Convenient and simple: crystal-clear water in private and commercial swimming pools. This is Dulcodos Pool Comfort system
-
Chlorine Dioxide System...
22 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h
-
CHLORINSITU® II 120g...
CHLORINSITU® II 120g Electrolysis System | Prominent
Open cell technology
-
CHLORINSITU® II 240g...
CHLORINSITU® II 240g Electrolysis System | Prominent
Open cell technology
-
CHLORINSITU® II 60g...
CHLORINSITU® II 60g Electrolysis System | Prominent
Open cell technology
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series covers a capacity range of (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series covers a capacity range of (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series with capacity range of 5 LPH at pressure 7bar.
-
DULCOFLOW DFMa08 | Prominent
Flow Meter DULCOFLOW
For the measurement of pulsating volumetric flows within the range of 0.03 ml/stroke to 10 ml/stroke The flow meter DULCOFLOW reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance as all wetted parts are made of PVDF and PTFE.
-
DULCOTEST® ORP Sensor |...
DULCOTEST® ORP Sensors
-
DULCOTEST® pH Sensor | PHES...
DULCOTEST® pH Sensors
Graduated pH measuring ranges 0 – 14
-
Free Chlorine Sensor CGE |...
The Prominent CLE 3.1-mA is a sensor with a passive 4-20 mA two-wire interface, ie power is supplied externally, for example via the controller. Measuring range: CLE 3.1-mA-10 ppm: 0.1...10 mg/l (nominal slope: 1.2 mA/ppm)
-
Free Chlorine Sensor CLE |...
The Prominent CLE 3.1-mA is a sensor with a passive 4-20 mA two-wire interface, ie power is supplied externally, for example via the controller. Measuring range: CLE 3.1-mA-10 ppm: 0.1...10 mg/l (nominal slope: 1.2 mA/ppm)
-
KUNTZE ZIRKON® pH POOL |...
DULCOTEST® pH Sensors
Graduated pH measuring ranges 0 – 14
-
KUNTZE ZIRKON® Redox POOL |...
Kuntze Zirkon® Redox Sensors
Redoxpotential/ORP-1500...+1500mV
-
Lip Seal Injection Valve PCB
Lip Seal Injection Valve PCB
10/4 - R 1/2 - 1/4 for PE/PTFE pipe
-
Membrane Cap for CGE 3,...
ProMinent membrane cap for CGE 3, CGE 2, CTE 1 sensors
-
Membrane Cap for CLE 3.1...
ProMinent membrane cap 2 for CLE 3.1
-
Motor-Driven Metering Pump...
Sigma 2 10bar, up to 135 liters/h, DN20
-
PE Suction and Discharge...
PE Suction and Discharge Line 10m
-
PE Suction and Discharge...
PE Suction and Discharge Line 50m | 12/9mm
-
PE Suction and Discharge...
PE Suction and Discharge Line 50m | 8/5mm
-
PE Suction and Discharge...
PE Suction and Discharge Line | 12/9mm
Indicated price is per running meter.
-
PE Suction and Discharge...
PE Suction and Discharge Line | 8/5mm
Indicated price is per running meter.
-
Peristaltic metering pump...
Peristaltic pump DULCOFLEX DFYa 410 liters/h, 8bar
-
Peristaltic pump DULCO flex...
Peristaltic pump DULCO flex Control - DFXa
Feed rate of 10 ml/h to 30 l/h at up to 5 bar back pressure DULCO flex Control – DFXa meters gaseous, viscous, abrasive or shear-sensitive media and sets new standards in metering. Linear and reproducible metering (± 2%) is guaranteed with this peristaltic pump under all process conditions. With it's painted design, the tube is easily replaced preventing losses in valuable production down time.
-
Peristaltic pump DULCO flex...
Peristaltic pump DULCO flex Control - DFXa
Feed rate of 10 ml/h to 30 l/h at up to 7 bar back pressure DULCO flex Control – DFXa meters gaseous, viscous, abrasive or shear-sensitive media and sets new standards in metering. Linear and reproducible metering (± 2%) is guaranteed with this peristaltic pump under all process conditions. With it's painted design, the tube is easily replaced preventing losses in valuable production down time.
-
Peristaltic pump DULCO flex...
Peristaltic pump DULCO flex DF2a
Capacity range 0.4 – 2.4 l/h at max. 1.5 bar back pressure The peristaltic pump DULCO®flex DF2a meters chemicals functionally, cost-effectively and quietly – ideal for use in swimming pools, hot tubs, and in spa and wellness facilities.
We use and provide only time-tested and high-quality swimming pool equipment from leading pool equipment manufacturers in Western Europe (BEHNCKE Hugo Lahm ASTRALPOOL, Pahlen, Speck Pumpen, Lambert Pools, LPW, Tintometer and other)