Active filters
Pool Equipment
Subcategories
Active filters
-
Automatic dosing system...
The measuring and control system DULCOMARIN® 3
-
Automatic Metering and...
Automatic Metering and Dosing Sysytem Splash Control
Convenient and simple: crystal-clear water in private and commercial swimming pools.
-
Automatic pool dosing...
Convenient and simple: crystal-clear water in private and commercial swimming pools. This is Dulcodos Pool Comfort system
-
BADU® OmniTronic R 41/3 A,...
Product information: "BADU® OmniTronic R 41/3 A, 1 1/2″"
-
BADU® OmniTronic R 51/3 A,...
Product information: "BADU® OmniTronic R 51/3 A, 1 1/2″"
-
Chlorine Dioxide System...
22 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h
-
CHLORINSITU® II 120g...
CHLORINSITU® II 120g Electrolysis System | Prominent
Open cell technology
-
CHLORINSITU® II 240g...
CHLORINSITU® II 240g Electrolysis System | Prominent
Open cell technology
-
CHLORINSITU® II 60g...
CHLORINSITU® II 60g Electrolysis System | Prominent
Open cell technology
-
Cleaner PVC GRIFFON CLEANER...
Cleaner PVC GRIFFON CLEANER | 1ltr
TIN WITH CAP 1 L Cleaner for (rigid) PVC, PVC-C and ABS
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series covers a capacity range of (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series covers a capacity range of (0.7 to 14.9 LPH) at pressures up to 232 psi (16 bar).
-
Dosing pump Prominent...
Membrane dosing pump Prominent Concept Plus
Quality, reliability and the best value! The ProMinent® Concept Plus series with capacity range of 5 LPH at pressure 7bar.
-
DULCOFLOW DFMa08 | Prominent
Flow Meter DULCOFLOW
For the measurement of pulsating volumetric flows within the range of 0.03 ml/stroke to 10 ml/stroke The flow meter DULCOFLOW reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance as all wetted parts are made of PVDF and PTFE.
-
DULCOTEST® ORP Sensor |...
DULCOTEST® ORP Sensors
-
DULCOTEST® pH Sensor | PHES...
DULCOTEST® pH Sensors
Graduated pH measuring ranges 0 – 14
-
Free Chlorine Sensor CGE |...
The Prominent CLE 3.1-mA is a sensor with a passive 4-20 mA two-wire interface, ie power is supplied externally, for example via the controller. Measuring range: CLE 3.1-mA-10 ppm: 0.1...10 mg/l (nominal slope: 1.2 mA/ppm)
-
Free Chlorine Sensor CLE |...
The Prominent CLE 3.1-mA is a sensor with a passive 4-20 mA two-wire interface, ie power is supplied externally, for example via the controller. Measuring range: CLE 3.1-mA-10 ppm: 0.1...10 mg/l (nominal slope: 1.2 mA/ppm)
-
Gland housing BADU Magic
Gland housing for BADU Magic 4, BADU Magic II/4, BADU Magic 6, BADU Magic II/6 und BADU Magic 8, BADU Magic II/8, Pos. 161
-
Housing BADU Magic
Housing incl. drain cap for all BADU Magic and BADU Magic II pump models, Pos. 101
-
Impeller BADU Bettar 8 /...
Impeller, dia = 112 mm, b = 6.5 mm, for Super Pump 12, Filterpump MP 12, BETTAR 12, BADU Top 12 and BADU Top II/12, Pos. 230
-
Impeller BADU Bettar/TOP 12
Impeller, dia = 112 mm, b = 6.5 mm, for Super Pump 12, Filterpump MP 12, BETTAR 12, BADU Top 12 and BADU Top II/12, Pos. 230
-
Impeller BADU Magic 11
Impeller, PP, dia=100 mm, b=10.5 mm, new, optimized version, for BADU Magic 11, BADU Magic II/11, BADU Picco 5, Aqua Plus 11, Trend 110, Pos.230 Old item number: 2921.623.004
-
Impeller BADU Magic 4
Impeller, PP, dia=100 mm, b=4 mm, new, optimized version, for BADU Magic 4, BADU Magic II/4, BADU Picco 5, BADU Picco II, Aqua Plus 4, Trend 50, Pos.230 Old item number: 2921.623.001
-
Impeller BADU Magic 6
Impeller, PP, dia=100 mm, b=6 mm, new, optimized version, for BADU Magic 6, BADU Magic II/6 and Aqua Plus 6, Pos.230
-
Impeller BADU Magic 8
Impeller, PP, dia=100 mm, b=8 mm, new, optimized version, for BADU Magic 8, BADU Magic II/8. Pos.230 Old item number: 2921.623.003
-
Impeller for BADU 90/11,...
Impeller, dia = 114 mm, b = 7.5 mm, for BADU 90/11, BADU Prime 11 and BADU 40/11, Pos.230
-
Impeller for BADU 90/13,...
Impeller, dia = 114 mm, b = 10 mm, for BADU 90/13, BADU Prime 13 and BADU 40/13, Pos.230
-
Impeller for BADU 90/15,...
Impeller, dia = 114 mm, b = 10 mm, for BADU 90/13, BADU Prime 13 and BADU 40/13, Pos.230
-
Lip Seal Injection Valve PCB
Lip Seal Injection Valve PCB
10/4 - R 1/2 - 1/4 for PE/PTFE pipe
We use and provide only time-tested and high-quality swimming pool equipment from leading pool equipment manufacturers in Western Europe (BEHNCKE Hugo Lahm ASTRALPOOL, Pahlen, Speck Pumpen, Lambert Pools, LPW, Tintometer and other)