BESGO valve - 5-way wash valve DN50 140mm

With hydraulic drive for water or air. DN 40+50 with adhesive nipple (can be glued on the outside), DN 65 with 4 adhesive sockets (can be glued on the inside) + 1 glue nipple. Internal parts made of V4A 1.4571, Viton/PTFE ozone-resistant seal including solenoid valve with manual emergency operation. All connecting pieces can be adjusted by 90° and are closed without current. in the filtration position, low hydraulic resistance. If the backwashing machine is connected to the drinking water network (at least 3 bar), a pipe separator (DVGW tested) must be connected upstream. Control not included in scope of delivery.

Advantages:

• Universally connectable

• No pressure shock

• very low pressure loss

• The connections can be rotated by 90°

• Closed in 10 seconds at 3 bar / 5 seconds closed at 3 bar with air

• silent

• Without power supply, the valve is closed and the basin cannot be accidentally emptied