Glue GRIFFON UNI-100®
Glue GRIFFON UNI-100®
All e-shop information
Delivery and return policy form our e-shop
Return and exchange policy of our e-shop
Glue GRIFFON UNI-100® APPLICATIONS:
For joining pipes, sleeves and fittings with press and loose fit (gap filling) in pressurised and drain systems. Suitable for diameters up to 400 mm. Max. 16 bar (PN 16). Maximum tolerance 0.6 mm diametrical clearance / 0.2 mm press fit. Suitable for pipe systems conforming to EN1329, 1452, 1453, 1455 and ISO15493 (PVC).
HANDLING
BEFORE USE:
Working conditions Do not use in temperatures ≤ +5°C. Coverage Indication of the number of joints per 1 L:
DURING USE:
Directions for use
1. Cut pipes square, chamfer edges and deburr.
2. Clean surfaces with Griffon Cleaner and Cleaner Cloth.
3. Apply adhesive rapidly and evenly all around (4-6x) on both surfaces (pipe thickly, socket thinly).
4. Assemble joint immediately. Remove excess adhesive. Do not load the joint mechanically for the first 10 minutes. Close packaging immediately after use.
Points of attention
Brush size varies per packaging volume. Use a suitable packaging (brush) for the diameter to be bonded.
AFTER USE:
Stains/residue Remove adhesive stains with Griffon Cleaner and Cleaner Cloth.
Data sheet
- Pool equipment
- PVC-U vamzdynas