Heat Pump HP 1500 Green Inverter Pro

Heat Pump HP 1500 Green Inverter Pro 15 kW, 60 m3

Why Inverter from Microwell?

We offer probably the most up-to-date cutting edge technology. This is called High End Full Stepless Inverter. Amongst the sea of inverters this is like no one other.

We equip the water heat exchanger with the best titanium class Grade 2 ASTM B338 and the highest volume of titanium, leading to biggest heat exchange surface (up to 1.4m2).

Microwell swimming pool heat pumps are designed for heating or cooling the water in pools and hot tubs at minimum operational costs.

HP 1500 Green is a powerful heat pump suited for pools up to 60m3 in volume.

HP 1500 Green provides 17.3 kW of heating capacity at conditions of air temperature 27°C, water temperature 15°C and air humidity 80%. This heat pump can provide up to 15 kW of heating at typical seaside conditions of air temperature 26°C, water temperature 26°C and air humidity 80%. At typical inland conditions of air temperature 26°C, water temperature 26°C and air humidity 63% the heat pump provides with 12.5 kW. At dry conditions with humidity 35% the pump reaches above 11.4 kW heating output.

HP Inverter technology

Inverter technology enables powerful yet quiet performance of Microwell heat pumps, while minimising the energy consumption. New Microwell models come exclusively with R32 gas.

We use currently the best hydrophobic and protection coating with goldish look called GOLDFIN. Heat pump during its operations condensates considerable amount of water on its cooler fins, the more phobic material the better for the heat pump. Why protection? Because salt present in sea wind or acid rains damage other types of heat pumps without GoldFin. But GoldFin is able to resist these elements.

We not only say that our heat pumps are to minus 10 degrees but we also equip the pumps with needed hardware to do so. The compressor is preheated and condensate tray is heated so the pump never freezes.

With the pump you receive as standard package without any surchages WIFI based on newest IOT platfrom TUYA and remote control contact.

SuperSilent+ mode limiting the capacity of the heat pump to 65% when activated. This will ensure your desired water temperature at such a low noise level that you can essentially sleep in the room next to the heat pump.

Proved performance and durability by customers across 20 countries and counting.

Automatic cooling/heating

Full stepless inverter DC compressor

Full high-end inverter with best equipment and features (exceeding Full low-end inverter and step inverter)

Heat pump of the highest quality and sophisticated inverter electronics

Remote control system, which enables other control system to control heat pump

Built in WiFi module for mobile phone control as standard

Winter module for year-round use as standard

With soft start which lowers the electricity needs, prolongs product life and avoids current peaks

Rapid defrosting of the ice, making it more efficient

With SuperSilent mode with power limited to 65% making it the quietest inverter pool heat pump

Air exchanger in Goldfin offering more hydropholic surface and better heat Exchange efficiency

New environment-friendly refrigerant R32

VISION AND RESEARCH

From the very beginning, we have been striving to shape the world, fostering progress, sustainability, prosperity. The backbone of our achievements has always been a vision to make things better by using intelligent engineering. This is what we ingrain in every product, in everything we do. Our company takes great effort in cultivating creative and dynamic environment. We invest in research and support our team of engineers and industry specialists to understand our customer, to think big and to make an impact. Equipped with core strategic competencies, we take pride in being a manufacturer with leading technology and extensive industry experience.

DEVELOPMENT AND TESTING

In our onsite laboratory and testing facility, fully equipped, qualified and certified for detailed analysis and evaluation is where our products uncover their full potential. Subjected to rigorous testing process, which includes various simulated climate and temperature conditions well beyond industry norms, final product fine-tuning takes place, ensuring uncompromising quality and unparallel performance. Once verified and approved product is standardised and assembled under skilled hands and eyes of our experienced technicians and engineers. The result is products designed to surpass expectations.

OPTIMISATION AND MANUFACTURING

Dedicated to enhancement on every phase of the product lifecycle, we pay special attention to equipment, operation and control optimisation. Starting with the selection of edgy components, we ensure conditions for longevity and maximal performance of our products otherwise impossible. Proud to manufacture our products in Slovakia, with them we continuously push the boundaries of existing technology, implementing new, innovative solutions to reach optimal control span an d final effectiveness, not forgetting to fulfil ecological footprint and other industry determined standards. We create intelligent products.

The highest HIGH-END Inverter pool heat pump

Explore the highest HIGH-END Inverter pool heat pump. You may be looking for a swimming pool pump or you have had one and have not been fully satisfied, read on, this Microwell Green Inverter Pro heat pump might be your answer.

Inverter technology brings the ability to continuously adjust speed and technical settings of a heat pump. This is done fully automatically to pin point the right settings so the output is maximum at minimum inputs. You thus can save a lot of money on energy consumption, have practically noise-less operation of the product while your pool is warm as per your desire.

There are many ‘inverter’ types or their makes. Some of them are set for a fixed point, providing you with none but marketing benefits which you cannot leverage to save money on your bill. Some, called LOW-END have pre-programmed step regulation. This means that the heat pump will only move between 3 or 4 predefined steps and will not look for an ideal operational point. And then there are HIGH-END pumps with completely continual regulation. Out of these are even highest range using the best components. For example Mitsubishi Twin Rotary compressor. This is where you’d find Microwell HP GREEN INVERTER PRO line.

We went for the top. Thank you for reading this, thanks for visiting our page and thank you for spending your precious time over our lines.

With Microwell Green Inverter Pro you can be sure that there isn’t a better or more advanced heat pump currently on the market.

INNOVATIVE SOLUTIONS & TECHNOLOGICAL ADVANTAGES

MICROWELL develops and manufactures well-rounded product assortment with two key specialisation areas - dehumidification and heating systems. Through continuous improvement and permanent focus on our customer, our products achieve results that push them in the lead. Ingrained in every step of the development process from research to assembly and final installation, MICROWELL products display innovation, sophisticated engineering, outstanding qualityand craftsmanship. Distinguished as trendsetters, MICROWELL products are built on our core commitment. We are committed to efficiency.

EFFICIENCY THAT MATTERS

We constantly focus on energy efficiency in each part of our products. Our goal is to be the most energy efficient on the market being able to save money on energy bill for our customers. Our products are equipped with features unique to MICROWELL machines.

microCONTROL+ represents a technology of the most precise and most economy humidity control. It is applied for ducted types of dehumidifiers. microCONTROL+ shortens the problem-solving time and overall contributes to healthier environment sooner and more effective than any other dehumidifier.

Devices marked with microCOMPRESSOR+ have special compressors integrated with a maximally fine-tuned working point for the dehumidifiers and for the heat pumps achieving the highest performance at lowest energy consumption.

microECONOMY+ is a technology of circulation pump control. Microwell swimming pool heat pump with microECONOMY+ ensures heating of your pool sooner and cheaper than any other swimming pool heat pump.

Dehumidifiers marked with microENERGY+ are equipped solely with the most energy saving DC fans. These bring the necessary performance, quiet operations and save costs on energy bill every day.

microSAFETY+ is a supervision system included by standard in DRY SIREN swimming pool dehumidifier models. The system monitors each DRY SIREN onconstant basis. In the case of a sign of technical problem or possible malfunction, the system creates a comprehensive report with technical data and sends it to Microwell automatically. Microwell has then the ability to advise the distributor, reseller or installer upper hand to take necessary measures to rectify the problem and avoid further damages. microSAFETY+ effectively protects your property 24/7. The data transfer is securely ciphered.

This mark stands for exceptional silence of the unit.

42 dB (A) at 1m distance for dehumidifier

30 dB (A) at 10m distance for heat pumps

Microwell machines are designed as plug-n-play devices. Typically, installation can be comfortably performed by a single technician or pool owner himself.

Microwell unique protection to avoid damage of your property or the heat pump in subzero temperatures.

Special vibration eliminating silent blocks are by standard included with all Microwell heat pumps.

At Microwell we believe in ongoing improvement of our work, enhancing our processes, producing our products that surpass our clients‘ needs. The motivation to improve the existing and exceed the average is what determines us and sets us apart from our competitors. Only by providing an outstanding work and exemplary products we will continue to stay in the lead as innovative, reliable and tru